Specifying an access control method, Configuration task list – H3C Technologies H3C S12500-X Series Switches User Manual

Page 104

Advertising
background image

92

The port performs 802.1X authentication upon receiving 802.1X frames, and performs OUI check

upon receiving non-802.1X frames.

NOTE:

An OUI is a 24-bit number that uniquely identifies a vendor, manufacturer, or organization. In MAC
addresses, the first three octets are the OUI.

426B

Performing MAC authentication

macAddressWithRadius: A port in this mode performs MAC authentication, and services multiple users.

427B

Performing a combination of MAC authentication and 802.1X authentication

macAddressOrUserLoginSecure
This mode is the combination of the macAddressWithRadius and userLoginSecure modes. It allows
one 802.1X authentication user and multiple MAC authentication users to log in.
The port performs MAC authentication upon receiving non-802.1X frames and performs 802.1X
authentication upon receiving 802.1X frames.

macAddressOrUserLoginSecureExt
This mode is similar to the macAddressOrUserLoginSecure mode, except that this mode supports
multiple 802.1X and MAC authentication users.

macAddressElseUserLoginSecure
This mode is the combination of the macAddressWithRadius and userLoginSecure modes, with
MAC authentication having a higher priority as the Else keyword implies. It allows one 802.1X
authentication user and multiple MAC authentication users to log in.

macAddressElseUserLoginSecureExt
This mode is similar to the macAddressElseUserLoginSecure mode except that this mode supports
multiple 802.1X and MAC authentication users as the keyword Ext implies.

64B

Configuration task list

Tasks at a glance

Remarks

(Required.)

798H

Enabling port security

N/A

(Optional.)

799H

Setting port security's limit on the number of secure MAC

addresses on a port

N/A

(Required.)

800H

Setting the port security mode

N/A

(Required.)

801H

Configuring port security features

:

802H

Configuring NTK

803H

Configuring intrusion protection

Configure one or more port security
features according to the network

requirements.

(Optional.)

804H

Configuring secure MAC addresses

N/A

(Optional.)

805H

Ignoring authorization information from the server

N/A

(Optional.)

806H

Enabling MAC move

N/A

Advertising