H3C Technologies H3C S12500-X Series Switches - Manual (Page 50)

38
Task Command
Clear HWTACACS statistics.
reset hwtacacs statistics { accounting | all | authentication |
authorization }
165B
Configuring LDAP schemes
381B
Configuration task list
Tasks at a glance
Configuring an LDAP server:
• (Required.)
730H
Creating an LDAP server
• (Required.)
731H
Configuring the IP address of the LDAP server
• (Optional.)
732H
Specifying the LDAP version
• (Optional.)
733H
Setting the LDAP server timeout period
• (Required.)
734H
Configuring administrator attributes
• (Required.)
735H
Configuring LDAP user attributes
(Required.)
736H
Creating an LDAP scheme
(Required.)
737H
Specifying the LDAP authentication server
(Optional.)
738H
Displaying and maintaining LDAP
382B
Creating an LDAP server
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an LDAP server and
enter its view.
ldap server server-name By default, no LDAP server exists.
383B
Configuring the IP address of the LDAP server
Step Command Remarks
1. Enter system view. System-view N/A
2. Enter LDAP server view. ldap server server-name N/A
3. Configure the IP address of
the LDAP server.
{ ip ip-address | ipv6
ipv6-address } [ port port-number ]
[ vpn-instance vpn-instance-name ]
By default, an LDAP server has no
IP address.
You can configure either an IPv4
address or an IPv6 address for an
LDAP server. The most recent
configuration takes effect.
384B
Specifying the LDAP version
Specify the LDAP version on the NAS. The device supports LDAPv2 and LDAPv3, and the LDAP version
specified on the device must be consistent with the version specified on the LDAP server.
To specify the LDAP version: