H3C Technologies H3C S12500-X Series Switches User Manual
Page 45
33
Step Command
Remarks
3.
Specify HWTACACS
authentication servers.
•
Specify the primary HWTACACS
authentication server:
primary authentication { ipv4-address
| ipv6 ipv6-address } [ port-number |
key { cipher | simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authentication server:
secondary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher | simple }
string | single-connection |
vpn-instance vpn-instance-name ] *
Configure at least one command.
By default, no authentication
server is specified.
Two HWTACACS authentication
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.
373B
Specifying the HWTACACS authorization servers
You can specify one primary authorization server and up to 16 secondary authorization servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If redundancy is not required, specify only the primary server. An HWTACACS server can
function as the primary authorization server of one scheme and as the secondary authorization server of
another scheme at the same time.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter HWTACACS
scheme view.
hwtacacs scheme
hwtacacs-scheme-name
N/A
3.
Specify HWTACACS
authorization servers.
•
Specify the primary HWTACACS
authorization server:
primary authorization
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection |
vpn-instance vpn-instance-name ] *
•
Specify a secondary HWTACACS
authorization server:
secondary authorization
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection |
vpn-instance vpn-instance-name ] *
Configure at least one command.
By default, no authorization server
is specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.
374B
Specifying the HWTACACS accounting servers
You can specify one primary accounting server and up to 16 secondary accounting servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If redundancy is not required, specify only the primary server. An HWTACACS server can