Troubleshooting hwtacacs, Troubleshooting ldap, Radius accounting error – H3C Technologies H3C S12500-X Series Switches User Manual
Page 71
59
405B
Solution
Check that:
•
The link between the NAS and the RADIUS server work well at both the physical and data link
layers.
•
The IP address of the RADIUS server is correctly configured on the NAS.
•
The authentication and accounting UDP port numbers configured on the NAS are the same as those
of the RADIUS server.
•
The RADIUS server's authentication and accounting port numbers are available.
186B
RADIUS accounting error
406B
Symptom
A user is authenticated and authorized, but accounting for the user is not normal.
407B
Analysis
The accounting server configuration on the NAS is not correct. Possible reasons include:
•
The accounting port number configured on the NAS is incorrect.
•
The accounting server IP address configured on the NAS is incorrect. For example, the NAS is
configured to use a single server to provide authentication, authorization, and accounting services,
but in fact the services are provided by different servers.
408B
Solution
Check that:
•
The accounting port number is correctly configured.
•
The accounting server IP address is correctly configured on the NAS.
28B
Troubleshooting HWTACACS
Similar to RADIUS troubleshooting. See "
747H
Troubleshooting RADIUS
."
29B
Troubleshooting LDAP
409B
Symptom
User authentication fails.
410B
Analysis
Possible reasons include:
•
A communication failure exists between the NAS and the LDAP server.
•
The LDAP server IP address or port number configured on the NAS is not correct.
•
The username is not in the format userid@isp-name, or the ISP domain is not correctly configured on
the NAS.
•
The user is not configured on the LDAP server.
•
The password entered by the user is incorrect.