Configuring an ipsec transform set, Displaying and maintaining ssh – H3C Technologies H3C S12500-X Series Switches User Manual
Page 195
183
Task Command
Remarks
Connect to
the SCP
server, and
transfer files
with the
server.
•
In non-FIPS mode, connect to the IPv4 SCP server, and transfer files with
this server:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get }
source-file-name [ destination-file-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 |
des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 }] * [ publickey keyname | source { interface
interface-type interface-number | ip ip-address } ] *
•
In FIPS mode, connect to the IPv4 SCP server, and transfer files with this
server:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get }
source-file-name [ destination-file-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 |
prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 }] * [ publickey keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In non-FIPS mode, connect to the IPv6 SCP server, and transfer files with
this server:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i
interface-type interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } | prefer-compress zlib
| prefer-ctos-cipher { 3des | aes128 | aes256 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256
| des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 }] *
[ publickey keyname | source { interface interface-type interface-number
| ipv6 ipv6-address } ] *
•
In FIPS mode, connect to the IPv6 SCP server, and transfer files with this
server:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i
interface-type interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa | prefer-compress zlib |
prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 |
sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 }] * [ publickey keyname |
source { interface interface-type interface-number | ipv6 ipv6-address } ]
*
Use one of the
commands.
Available in
user view.
121B
Displaying and maintaining SSH
Execute display commands in any view.
Task Command
Display the source IP address or source
interface information configured for the SFTP
client.
display sftp client source
Display the source IP address or source
interface information configured for the Stelnet
client.
display ssh client source