Setting global password control parameters – H3C Technologies H3C S12500-X Series Switches User Manual
Page 162
Advertising
150
[SwitchB-ipsec-policy-isakmp-use1-10] quit
# Specify the card in slot 1 to process the traffic for VLAN-interface 1.
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] service slot 1
# Apply the IPsec policy use1 to VLAN-interface 1.
[SwitchB-Vlan-interface1] ipsec apply policy use1
476B
Verifying the configuration
After the previous configurations, IKE negotiation is triggered to set up IPsec SAs when there are
end-to-end packets between Switch A and Switch B. After IPsec SAs are successfully negotiated by IKE,
the traffic between the two switches is IPsec protected.
Advertising
This manual is related to the following products: