Security association – H3C Technologies H3C S12500-X Series Switches User Manual
Page 190
178
Task Command
Remarks
Establish a connection
to an Stelnet server.
•
In non-FIPS mode, establish a connection to an IPv4
Stelnet server:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5
| md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 }
| prefer-stoc-cipher { 3des | aes128 | aes256 |
des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In FIPS mode, establish a connection to an IPv4
Stelnet server:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ip
ip-address } ] *
•
In non-FIPS mode, establish a connection to an IPv6
Stelnet server:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer- ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5
| md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 }
| prefer-stoc-cipher { 3des | aes128 | aes256 |
des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] *[ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In FIPS mode, establish a connection to an IPv6
Stelnet server:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ipv6
ipv6-address } ] *
Use one of the commands.
Available in user view.