H3C Technologies H3C S12500-X Series Switches - Manual (Page 18)

10
Figure 3 S12510-X AC installation accessory kits
(1) Mounting brackets (2) Cable management bracket
(3) Plastic panel (4) Power module slot
Installing the power cord bracket (S12510-X AC and
S12516-X AC switches)
One power cord bracket is delivered with each S12510-X AC switch. Two power cord brackets are
delivered with each S12516-X AC switch.
The procedures for installing a power cord bracket to an S12510-X AC switch or an S12516-X AC switch
are the same. This section describes how to install the power cord bracket to an S12510-X AC switch.
To install the power cord bracket:
1. Unpack the power cord bracket.
2. Place the power cord bracket to the chassis.
3. Align the installation holes on the bracket with those on the chassis.
4. Fasten the screws to secure the power cord bracket.