Connecting an sfp+/qsfp+/qsfp+ to sfp+ dac cable – H3C Technologies H3C S12500-X Series Switches User Manual
Page 53
Advertising
45
Figure 36 Installing a CXP module
Connecting an SFP+/QSFP+/QSFP+ to SFP+ DAC cable
Use SFP+ DAC cables to connect SFP+ ports, QSFP+ DAC cables to connect QSFP+ ports, and QSFP+
to SFP+ DAC cables to connect QSFP+ and SFP+ ports. All these cables are hot swappable.
To connect an SFP+, QSFP+, or QSFP+ to SFP+ DAC cable:
1.
Wear an ESD wrist strap, and make sure it makes good skin contact and is reliably grounded. For
more information, see "
."
2.
Unpack the cable.
3.
Plug the cable connector into the port. Make sure the cable connector is the right side up.
The bend radius of the cable must be a minimum of eight times the cable diameter.
Advertising