H3C Technologies H3C S12500-X Series Switches - Manual (Page 50)

42
Installing a CFP2 module
CAUTION:
•
Read this section carefully before you install or remove a CFP2 module.
• Before you install or remove a CFP2 module, remove the optical fiber (if any) from it.
• Align the CFP2 transceiver module correctly with the fiber port before pushing it in the port.
• Do not touch the golden plating on a CFP2 module.
To install a CFP2 module:
1. Unpack the CFP2 module.
2. Pivot the metal handle up so that the handle is on top of the transceiver module.
3. Push the transceiver module slowly into the port until it clicks into the port.