Mounting the switch in the rack, Figure 16, Align the bottom – H3C Technologies H3C S12500-X Series Switches User Manual
Page 30
Advertising
22
Figure 16 Installing cage nuts for attaching mounting brackets (for S12516-X AC/S12516-X DC switch)
Mounting the switch in the rack
CAUTION:
•
Do not hold the handle of an FRU (for example, the fan tray) or the air vents of chassis to carry the
switch. Any attempt to carry the switch with these parts might cause equipment damage or even bodily
injury.
•
The switch is heavy. H3C recommends that you use a mechanical list to move and carry the switch to the
rack.
•
If you lift the switch manually, remove the fan trays, cable management brackets, and filler panels from
the switch before lifting. Reinstall these components after installing the switch in the rack.
Advertising