H3C Technologies H3C SR6600 - Manual (Page 125)

115
Technical specifications
Table 41 FIP-10 specifications
Item Specification
HIM Not supported
MIM 4 MIMs supported at the same time
Dimensions (H × W × D) 45 × 399 × 412 mm (1.77 × 15.71 × 16.22 in)
Power consumption 33 W
Hot-swapping Supported
Slot Four
Maximum interface modules provided by FIP-10 in full configuration
Table 42 Maximum interface modules provided by FIP-10 in full configuration
Interface
module
One MCP Two MCPs
SR6604 SR6608 SR6604 SR6608
FIP-10 2 4 1 3
MIM 8 16 4 12
HIM Not supported Not supported Not supported Not supported
FIP-20
You can plug up to two HIMs or two MIMs into the FIP-20. The FIP-20 also supports intermix of a HIM and
a MIM.
Figure 111 FIP-20 front panel
(1) Slot 2 (2) Slot 1 (3) Status LED
(4) OPEN BOOK mark
The OPEN BOOK mark indicates that the operator must read the following sections before working with
the FIP:
Table 43 References for FIP operations
Operation Reference
Install and remove the FIP See " Installing a FIP module " and " Replacing a FIP module ."
Install and remove interface
modules See " Installing a HIM ", " Installing a MIM ", Replacing a HIM , and
" Replacing a MIM ."
1 2 3 4