H3C Technologies H3C SR6600 - Manual (Page 69)

59
DEVICE_SERIAL_NUMBER:NONE
MAC_ADDRESS:NONE
MANUFACTURING_DATE:NONE
VENDOR_NAME:H3C
Table 12 Output description
Field Description
DEVICE_NAME Module type
DEVICE_SERIAL_NUMBER Module serial number
MAC_ADDRESS
MAC address of the module:
• An MPU has a MAC address.
• A service module does not have a MAC address, and the field is
displayed as NONE.
MANUFACTURING_DATE Manufacturing data of the module
VENDOR_NAME Vendor name
The operation is not supported on
the specified board or subslot The display device manuinfo command is not supported on a module that
is virtualized through the MPU.
Displaying the CPU usage of a module
Use the display cpu-usage command to display the CPU usage of the module in each slot.
<Sysname> display cpu-usage
Slot 0 CPU usage:
2% in last 5 seconds
2% in last 1 minute
1% in last 5 minutes
Slot 5 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Output description
Field Description
Slot 0 CPU usage
CPU usage of the module in slot 0.
If the module in the slot has multiple CPUs, Slot 0 CPU usage shows the
usage of the main CPU of the module in slot 0, and Slot 0 CPU 1 CPU usage
shows the usage of the standby CPU of the module in slot 0.
1% in last 5 seconds
Average CPU usage in the last five seconds (after the router boots, the router
calculates and records the average usage at the interval of five seconds).
1% in last 1 minute
Average CPU usage in the last minute (after the router boots, the router
calculates and records the average usage at the interval of one minute).
1% in last 5 minutes
Average CPU usage in the last five minutes (after the router boots, the router
calculates and records the average usage at the interval of five minutes).