H3C Technologies H3C SR6600 - Manual (Page 145)

135
LED Status Description
Fast flashing (8
Hz) A critical fault has occurred to the system. In this state,
handle the fault immediately.
(yellow/green)
Management
Ethernet port
LED
Solid yellow A 10/100 Mbps link is present.
Solid green A 1000 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of
10/100 Mbps.
Flashing green
Data is being received or transmitted at a rate of 1000
Mbps.
(green)
USB port LED
Off No host is connected to the device-mode USB port.
Steady on
A host is connected to the device-mode USB port. The
USB cable can be unplugged in this state.
Flashing
Data is being transmitted or received through the
device-mode USB port. In this state, do not unplug the
USB cable.
(green)
CF card LED
Off
No CF card is present or the CF card is not
recognizable.
Steady on A CF card is in position and has been detected.
Flashing
The system is accessing the CF card. In this state, do not
remove the CF card.
NOTE:
Do not remove the CF card when the CF LED is flashing. Otherwise, the file system on the CF card will be
damaged.
Figure 119 RSE-X1 LEDs
Table 66 RSE-X1 LED description
LED Status Description
(green)
CF card LED
Off No CF card is present or the CF card is not recognizable.
Steady on A CF card is in position and has been detected.
Flashing
The system is accessing the CF card. In this state, do not
remove the CF card.