H3C Technologies H3C SR6600 - Manual (Page 86)

76
Figure 80 Pulling out the fan tray
3. Install a new fan tray. For more information, see " Installing a fan tray ."
NOTE:
•
Do not keep the router working without a fan tray for more than two minutes because poor ventilation
might cause damage to the router.
• To protect the removed fan tray, place it in an antistatic bag.
• For more information about the LED status on the fan tray, see " Appendix C LEDs ."
Replacing an air filter
CAUTION:
You can clean the air filter with water, but wait until it is completely dry before installing it again.
An air filter is an optional accessory.
To replace an air filter:
1. Use a Phillips screwdriver to loosen the captive screws of the air filter to be removed until all spring
pressure is released.