H3C Technologies H3C SR6600 - Manual (Page 70)

60
Displaying the memory usage of a module
Use the display memory command to display the memory information of the MPU.
<Sysname> display memory
System Total Memory(bytes): 431869088
Total Used Memory(bytes): 71963156
Used Rate: 16%
Table 14 Output description
Field Description
System Total Memory(bytes) Physical memory size (in bytes) of the module
Total Used Memory(bytes) Used memory size (in bytes) of the module
Used Rate Memory usage of the module
Displaying the CF card information
Use the display device cf-card command to display the CF card information.
<Sysname> display device cf-card
Slot No. Dev No. Status Size(M)
-----------------------------------------------
0 0 Normal 495
0 1 Absent N/A
Table 15 Output description
Field Description
Slot No Slot number of the CF card
Dev No.
Device number of the CF card:
• 0 for a built-in CF card
• 1 for an external CF card
Status:
Operational status of the CF card:
• Absent—No CF card is present in the slot.
• Fault—The CF card fails.
• Normal—The CF card is operating correctly.
Size: Storage capacity of the CF card
Displaying the operational status of the fan
Use the display fan command to display the operational status of the fan.
<Sysname> display fan
Fan 1 State: Normal