Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 21)

Connect Your Presenter System
CameraMan 3-CCD Presenter Camera System Installation and Operations Manual 15
the back of the docking station. Do NOT plug it
directly into the back of the camera.
5. Plug the other end of the power supply into a
120 VAC outlet.
6. Connect the antennas to the appropriate con-
nectors and position them both to point vertically
for optimum performance.
For best performance, locate the antenna in free
space, at least 6’ from the camera or any wires,
metal surfaces, wall, etc.
Make sure the Docking Station is at least 1 foot
away from the camera unit.
See “Docking Station Clearance Diagram” on
page 48.
Multi-Camera
Applications
In a multi-camera application, refer to the multi-cam-
era section of the General Pan/Tilt Operations
Manual. Follow the appropriate procedure, using
the RS-485 connections on the back of the Main
Docking Station instead of the connections on the
back of the camera.