Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 38)

Chapter 4
32 CameraMan 3-CCD Presenter Camera System Installation and Operations
The Battery Charger takes 4 to 6 hours to recharge
the Auxiliary Battery Pack.
Audio Switch
To activate Audio:
1. Set the AUDIO switch on the top of the Tracking
Ring Power Pack to ON.
2. Speak at a normal level.
If you decide not to use the Audio feature of the
Tracking Ring Package, the AUDIO switch on the
top of the Tracking Power Pack should be set to
OFF.
Using autoTRACK
Your Presenter Camera System’s ability to follow a
presenter around the room is unmatched in the
industry. Now that you’ve connected, configured,
and powered up all the system components, you
can begin to put them to use.
AutoTRACK Mode
AutoTRACK mode enables the CameraMan camera
to follow a presenter who is wearing the Tracking
Ring Package. To engage the autoTRACK mode,
press one of the four autoTRACK View buttons on
the Tracking System Keypad.
If you are using a Deluxe Camera System with Per-
sonal Locator Keypads, use the following proce-
dure:
1. When you are ready to begin autoTRACKing,
press LOCK on the Chairperson Locator Keypad
to disable all Personal Locators from controlling
the camera.