Optional auxiliary battery pack – Grass Valley 3-CCD CameraMan Rev.C User Manual

Page 37

Advertising
background image

Use Your Presenter System

CameraMan 3-CCD Presenter Camera System Installation and Operations Manual

31

The LED on the Battery Charger indicates when the
battery is fully charged. If a battery is very low, the
LED on the charger flashes slowly. When the battery
is fully charged, the LED on the charger flashes
quickly.

Optional Auxiliary
Battery Pack

An optional Rechargeable Auxiliary Battery Pack is
available to connect with the Tracking Power Pack
for extra long use. When attached to the Tracking
Power Pack, the Auxiliary Battery Pack overrides
the built-in 12-hour Battery. If you need more than
12 hours of use, connect the Auxiliary Battery Pack
to the Tracking Power Pack, as shown below. This
provides up to 24 hours of use.

FIGURE 4.1

Auxiliary Battery Pack Plugged In

To recharge the Auxiliary Battery Pack:

1.

Turn OFF the Tracking Power Pack.

2.

Set the switch on the front of the Battery Charger
to AUXILIARY BATTERY PACK.

3.

Plug the Battery Charger into an electrical outlet
and connect the Auxiliary Battery Pack to the
charger.

To get the maximum hours of use, use the 12-hour
built-in battery first until the Battery LOW light illu-
minates, and then attach the Auxiliary Battery Pack
for an additional 24 hours, giving you a total of 36
hours of use.

Advertising