Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 39)

Use Your Presenter System
CameraMan 3-CCD Presenter Camera System Installation and Operations Manual 33
2. Press one of the four autoTRACK View buttons
on the Tracking System Keypad.
3. when you are finished autoTRACKing, press
UNLOCK on the Chairperson Locator Keypad.
For more information on the Personal Locator Key-
pads, see the CameraMan Personal Locator Sys-
tem Operations Manual.
If the LOCK button is not used and a MY TURN but-
ton is pressed while autoTRACKing, then the sys-
tem disengages the autoTRACK mode and goes to
the MY TURN position.
The autoTRACK mode’s operation requires the sub-
ject to be in the field-of-view of the autoTRACK
camera.
Once the subject enters the field-of-view, the cam-
era moves to lock onto line-of-sight tracking.
If the subject becomes obscured from its line-of-
sight, then the camera stops tracking and returns to
the HOME position ( “Home (Preset 1)” on page 41).
However, momentary breaks (e.g., someone walk-
ing through the line-of-sight) has minimal effects to
the tracking performance.