Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 30)

Chapter 3
24 CameraMan 3-CCD Presenter Camera System Installation and Operations
Modification of the following features is not required
for system operation, but they are available if
needed.
For information on configuring your CameraMan
camera, refer to the Installation and Operations
Manual that came with the camera.
Understanding the
Panning Motion
The PAN/TILT and SUBJECT POSITION arrows on
your Tracking System Keypad are designed to help
you maneuver the camera both in and out of
autoTRACK mode.
FIGURE 3.1 Facing the CameraMan Camera
The default setting, shown above, is designed to
operate as if you are facing the CameraMan cam-
era. Some examples of applications that would ben-
efit from the default settings are:
• Distance Learning where you are the instructor.
• Presentations where you are the presenter and
the audience members are watching you on a
monitor.
• Videoconferences where you are an on-screen
participant.
• Any other application where you, the keypad
controller, need to be on camera.