Use your presenter system, System start up, Tracking ring package – Grass Valley 3-CCD CameraMan Rev.C User Manual
Page 35: Chapter 4 use your presenter system
Advertising
071838600
June 2005
29
System Start Up
Once all necessary connections and configurations
are made, you are ready to start up the rest of the
system.
Tracking Ring Package
1.
Power ON the CameraMan camera with the
POWER switch on the Main Docking Station.
2.
Set the Tracking Ring Power Pack’s Power
switch, located on the top of the unit, to ON. The
Power ON LED on the Power Pack will illumi-
nate.
If the Power ON LED on the top of the Tracking
Ring Power Pack does not illuminate, refer to the
Troubleshooting section of this manual.
3.
Verify that the TRACKING UNIT STATUS LED
on the camera’s display panel is illuminated,
indicating the communication link between the
camera and the Tracking Ring.
Chapter 4
Use Your Presenter System
Advertising