Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 45)

Use Your Presenter System
CameraMan 3-CCD Presenter Camera System Installation and Operations Manual 39
If the subject appears too far to the right in the
frame...
...press the LEFT arrow to move the subject’s posi-
tion.
Manual Pan/Tilt Arrows
Press the up, down, right, or left PAN/TILT arrows to
pan or tilt the autoTRACK camera in that direction.
By pressing any of the PAN/TILT arrows in the Cam-
era Control section of the Tracking System Keypad,
you will disengage the autoTRACK mode.
To reactivate the autoTRACK mode, press any of
the four autoTRACK View buttons. This will engage
the autoFIND mode. When the presenter is in the
field-of-view, CameraMan locks onto line-of-sight
tracking in the view selected.