Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 42)

Chapter 4
36 CameraMan 3-CCD Presenter Camera System Installation and Operations
WIDE AutoTRACK View
Press the WIDE autoTRACK View button. The
video frame should show a wide body shot of you. If
you would like to alter your image in this view, you
will need to reset the Wide View.
To SET or CHANGE the wide autoTRACK VIEW:
1. After pressing WIDE View, use the SUBJECT
POSITION arrows to position yourself in the mid-
dle of the video frame.
2. Use the manual ZOOM buttons to set the
needed Zoom perspective, if needed.
3. Use the manual FOCUS buttons to set the focal
point, if needed.
4. Use the manual IMAGE buttons to set the
needed light/dark contrast, if needed.
5. Press and hold WIDE until you hear two beeps,
indicating the new setting is stored.
To RECALL the wide autoTRACK VIEW:
Press and release WIDE View. The camera recalls
the information stored in the WIDE button.
RIGHT AutoTRACK View
Press the RIGHT autoTRACK View button. Your
image should now be offset to the right side of the
video frame. This view is used when the presenter
wants to share the video screen with key presenta-
tion areas (a left-handed presenter may use this
view while pointing to a flipchart). If you would like to
alter your image in this view, you will need to reset
the Right View.