Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 51)

Use Your Presenter System
CameraMan 3-CCD Presenter Camera System Installation and Operations Manual 45
Adjusting the Camera
Setup Mode Settings
SETUP and MODE Buttons
To enter the camera setup mode:
• Press and hold the SETUP and MODE buttons
simultaneously for 2.5 seconds. The keypad
should beep once
• Release both buttons.
• The camera will flash, and an on-screen menu
will appear when it enters the camera setup
mode.
MENU EDIT Arrows
To select a setting, or the value of a setting, use the
PAN/TILT MENU EDIT left/right and up/down arrows
on your keypad.
• tilt UP: moves the on-screen cursor up.
• tilt DOWN: moves the on-screen cursor down.
• pan RIGHT: increases, or changes the setting.
• pan LEFT: decreases, or changes the setting.
To change between the various on-screen set-
tings menus:
• Place the cursor on the first line of the menu
using the medu edit UP and DOWN arrows.
• Select the menu page (1-4) using the menu edit
LEFT and RIGHT arrows.
For more information on the on-screen camera set-
tings and their functionality, refer to the CameraMan
installation and operations manual that came with
your camera.
When accessing the on-screen camera settings, do
not change the BAUD RATE as this may impact the
camera’s communication links.