Grass Valley EDIUS Pro v.6.5 - Manual (Page 247)

225
Placing Clips
EDIUS - Reference Manual
Placing Clips
Setting Channel Mapping
Set which track the channel containing the source clip (source channel) should be mapped to when placing clips on the
timeline. When performing editing operations such as placing clips or pasting them with shortcut keys, the clips are
placed on a track according to the channel mapping setting.
Connecting/Disconnecting the Source Channel
Connect or disconnect the channel containing the source clip (source channel). Disconnected channels are not placed
on the timeline.
1 Select the source clip to be placed.
The source channel is displayed in the track patch.
2 Click the track patch of the unnecessary source channel to disconnect.
Each click switches between connect/disconnect.
2
Alternative
• Right-click the track patch of the source channel, and click [Connect Source Channel (Video) (Toggle)]([Connect
Source Channel (Audio) (Toggle)]).
• Connecting/disconnecting video source channel: [7]
• Connecting/disconnecting audio source channel: [8]
3
•
You can connect/disconnect multiple source channels all together. Click [Connect Source Channel (Video) -
Toggle] or [Connect Source Channel (Audio) - Toggle].
• As the default settings, 1st audio channel in each track is assigned to the 1st channel of the export destination,
and 2nd audio channel is assigned the 2nd channel of the export destination.
[Audio Channel Map] Dialog Box 0 P44
• To place an audio source channel as a monaural channel or stereo channel, right-click [Connect Source
Channel (Audio) (Toggle)] and click [Audio Source Channel (Stereo)]. Each click switches between the monaural
channel mode and stereo channel mode.