Trimming clips, About the trim mode, Switching to the trim mode – Grass Valley EDIUS Pro v.6.5 User Manual
Page 286: Abou
Editing Timelines
264
EDIUS - Reference Manual
Trimming Clips
About the Trim Mode
You can switch to the trim mode to perform editing to fine-adjust video in 1 frame units or 10 frame units by button
operation. Trimming is also possible in the standard mode by dragging the mouse.
Switching to the Trim Mode
1 Click [Mode] on the menu bar, and click [Trimming Mode].
The preview window switches from the standard mode to the trim mode.
The current trimming type is displayed on the status bar of the timeline window.
2
Alternative
• Double-click the In or Out point of the clip.
• Switching to the trim mode:
[F6]
3
•
The trim mode can be switched to the standard mode by the following operation.
- Click [Mode] on the menu bar, and click [Normal Mode].
- Click [×] on the lower right of the trim mode screen.
- Press [F6] on the keyboard again.
- Switching to standard mode:
[F5]