Remote k2 storage standalone add/modify settings – Grass Valley GV STRATUS Installation v.3.1 User Manual
Page 114
Description
Setting or button
Specifies either SAN-attached K2 Summit system or Standalone K2
Summit system. When SAN Client is selected, settings are as follows.
Type of K2 device
The name of the remote K2 SAN, as named in K2Config.
SAN Name
The SAN-attached K2 Summit system designated to be the managed
device for the entire K2 SAN storage system.
Primary Device
The maximum number of concurrent transfers allowed. The maximum
is set in K2Config. You may select the maximum or a lesser number.
Refer to your system design.
Maximum concurrent
transfers
The user name to access the remote K2 Summit system. This is the
internal system account, which by default is GVAdmin
User Name
If on a domain, the domain that manages the account that accesses the
remote K2 Summit system.
Domain
The password to access the remote K2 Summit system. For GVAdmin
the default password is
adminGV!
.
Password
The FTP server name for the remote K2 Summit system. Typically this
is the name of the K2 SAN's FTP server with the
_he0
suffix added.
FTP Server Name
The FTP user name for the remote K2 Summit system. Typically this
is
movie
.
FTP User Account
The FTP password for the remote K2 Summit system.
FTP Password
Related Topics
Remote and multiple site configuration
on page 210
Remote K2 Storage standalone Add/Modify settings
These settings are optional on GV STRATUS systems.
To locate these settings, click
Core | K2 Storage | Remote K2 Storage | Add
or
Modify
114
GV STRATUS Installation and Service Manual
2013 12 19
Reference to GV STRATUS Control Panel settings