Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 211)

• Playout — In addition to the browse, transfer, and send workflow, you can use the Aurora Playout
functionality at the remote site.
To integrate with a playout system on a remote site, add your remote XMOS and SDB servers
on the Playout Remote Sites tab in GV STRATUS Control Panel application. This allows you
to view and select placeholders from your remote site.
• Send to K2 system — From your local GV STRATUS system, you can send assets to a remote
K2 system that is not part of a GV STRATUS system, using the Send Destination feature.
To use the Send Destination feature, configure Remote K2 Storage and Send Destination settings.
If you have remote sites configured in your system, the Navigator panel displays nodes for those
sites. Only the
Assets node is displayed under remote sites. Asset indicators identify assets on remote
sites.
Configuring multisite browse and transfer workflow
The following are prerequisites for this workflow:
• Both local and remote GV STRATUS systems must have multisite licenses.
• The FTP networks on the local and remotes sites must be able to communicate with each other.
Configure settings in the local site GV STRATUS Control Panel application.
Configure the remote site in Remote Sites settings.
Related Topics
Remote Sites settings on page 89
Configuring multisite browse, transfer, and send workflow
The following are prerequisites for this workflow:
• Both local and remote GV STRATUS systems must have multisite licenses.
• The FTP networks on the local and remotes sites must be able to communicate with each other.
Configure settings in the local site GV STRATUS Control Panel application.
1. Configure the remote site in Remote Sites settings.
2. Configure one or more remote K2 systems in Remote K2 Storage settings.
3. Configure the remote K2 systems as Send Destination in Send Destinations .
Only those K2 systems configured in Remote K2 Storage are available for configuration as Send
Destinations.
Related Topics
Remote Sites settings on page 89
Remote K2 Storage SAN Add/Modify settings on page 113
Send Destinations settings on page 126
2013 12 19 GV STRATUS Installation and Service Manual 211
Administering and maintaining the GV STRATUS system