Reorder adapters – Grass Valley GV STRATUS Installation v.3.1 User Manual

Page 248

Advertising
background image

4. For GV STRATUS servers with an FTP/Streaming connection but no media (iSCSI) connection,

(Express, Core), verify adapter names.

The required adapter names are specified in the following table:

Adapter names

Control Connection

FTP-Streaming Connection

Unused Connection 1

Unused Connection 2

5. For GV STRATUS servers with an FTP/Streaming connection and with one or two media (iSCSI)

connections, (Proxy Encoder, Conform, XRE), verify adapter names

The required adapter names are specified in the following table:

Adapter names

Control Connection

FTP-Streaming Connection

Media Connection #1

Media Connection #2

6. Proceed as follows:

If all the names on this system are configured correctly to locations, skip the rest of this
procedure.

If names on this system are not configured correctly, for each adapter name incorrectly
configured, complete the remaining steps of this procedure.

7. Select the name in the Name column.

8. Select

File | Rename

to enter rename mode.

9. Type the name required.

Next, reorder adapters.

Reorder adapters

Before beginning this task, make sure of the following:

Adapters are named correctly

The control team is created

The team and loopback are named

1. If not already open, open Network Connections as follows:

a) Open the Windows

Network and Sharing Center

control panel.

b) Click

Change Adapter Settings

.

Network Connections opens.

248

GV STRATUS Installation and Service Manual

2013 12 19

Administering and maintaining the GV STRATUS system

Advertising
This manual is related to the following products: