Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 407)

4. K2Config Conform Server setup on page 411. Only GV STRATUS systems with a Conform
Server require this process.
SiteConfig Conform Server network set up
Only systems with a Conform Server require this process.
If you received your system already set up from Grass Valley, your Conform Server or Servers are
already included in the SiteConfig system description and set up on the network, so you can skip
these tasks. Otherwise, work through the topics in this section.
Adding a Conform Server to the SiteConfig system description
Prerequisites for this task are as follows:
• Conform Servers are racked, cabled, and powered on.
• The system description contains a group.
This topic applies to a GV STRATUS server that is a Conform Server.
1. In the Network Configuration | Devices tree view, right-click a group and select Add Device .
2. Configure settings for the device you are adding as follows:
• Family: GV STRATUS
• Device Type: GV STRATUS Server
• Model: GV STRATUS Conform Server or GV STRATUS Conform Server (Redundant iSCSI)
• Name – This is the device name, as displayed in the SiteConfig device tree view and device
list view. This name can be different than the host name (network name). You can accept the
default name or enter a name of your choice. Devices in the tree view are sorted alphabetically.
• Amount — Select the number of Conform Servers, according to your system design.
• Platform — Select x64 .
• Control network– Select the control network.
• Starting Address – Select from the list of available addresses on the selected control network.
If adding multiple devices, this is the starting address, with addresses assigned sequentially
to each device added.
3. Click OK to save settings and close.
SiteConfig adds the Conform Server to the system description as a placeholder device.
4. Verify that unmanaged control network interface is configured correctly and modify if necessary.
Next, add the GV STRATUS server to the control network.
2013 12 19 GV STRATUS Installation and Service Manual 407
Complete system set up and configuration