Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 115)

September 7, 2007 K2 Storage System Instruction Manual 115
Configuring the redundant server
Configuring the redundant server
You must wait for the primary K2 Media Server to restart before continuing. To
verify, from the control point PC open the MS-DOS command prompt and use the
“ping” command.
For Level 2 redundant, after you have configured the first K2 Media Server (server
A) you next configure the redundant K2 Media Serer (server B).
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server B.
Database Server
Configuration
Enter the name or IP address of K2 Media server B. This is the redundant
partner of the server you are now configuring.
Click
Next .
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The server restarts. Wait until all
startup processes have completed before continuing.
On this page… Do this…