Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 456)

456 K2 Storage System Instruction Manual September 7, 2007
Chapter 10 Installing the Level 20R Storage System
Example of Level 20R names and IP addresses
Setting up host tables
The hosts file is used by the control network and the streaming/FTP network to
determine the IP address of devices on the network when only a the device name
(hostname) is given. The steps that follow describe how to edit the hosts file located
at C:\Windows\system32\drivers\etc\hosts on Windows XP and Windows 2003
Server operating system computers. If you include the names and addresses of all the
devices on the network, then you can copy the same file onto all the other K2 devices
instead of editing the hosts file on each K2 device.
Computer
name Device type Streaming network
addresses Control network
addresses Media network
addresses Comments
root_server_1 K2 Media
Server 192.168.101.11
a
a.
This IP address must resolve to hostname root_server_1_he0
192.168.100.11 192.168.99.11 These two
servers are a
redundant pair.
192.168.99.12
root_server_2 K2 Media
Server 192.168.101.21
b
b.
This IP address must resolve to hostname root_server_2_he0
192.168.100.21 192.168.98.21
192.168.98.22
root_server_3
(optional) NH K2 Media
Server 192.168.101.31
c
c.
This IP address must resolve to hostname root_server_3_he0
192.168.100.31 — This server has
roles of FTP
server and
NAS server
only.
root_raid_1 RAID — 192.168.100.51 — Each RAID
controller is on
the control
network for
monitoring.
root_raid_2 RAID — 192.168.100.52 —
root_gige_1 GigE switch — 192.168.100.61 — —
root_gige_2 GigE switch — 192.168.100.62 — —
root_cppc_1 Control point
PC — 192.168.100.81 — —
root_client_1 iSCSI client — 192.168.100.111 192.168.99.111 For the control
network, one
IP address is
shared between
the two teamed
ports. For
media
networks,
subnet 99 is the
“A” network
and subnet 98
is the “B”
network.
192.168.98.112
root_client_2 iSCSI client — 192.168.100.121 192.168.99.121
192.168.98.122
root_client_3 iSCSI client — 192.168.100.131 192.168.99.131
192.168.98.132
root_client_4 iSCSI client — 192.168.100.141 192.168.99.141
192.168.98.142