Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 581)

September 7, 2007 K2 Storage System Instruction Manual 581
Configuring server A - Part 2
On this page… Do this…
File System Server
Configuration
This page checks on the
configuration of the K2
Media Server in one of its
main roles as a file system
server. The K2 Media Server
also functions as a file
system client, which is also
checked from this page.
If you have not already done so, enter the name or IP address of the
redundant K2 Media Server (server B). Click
Check . When the wizard
reports that the configuration is correct, click Next .
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.