Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 375)

September 7, 2007 K2 Storage System Instruction Manual 375
Adding K2 Storage System clients
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Your configurations for the Level 10R K2 Storage System are complete.
Adding K2 Storage System clients
You can add now clients, such as K2 Media Clients or Aurora Edits, to the K2 Storage
System and configure them using the K2 System Configuration application.
• For Aurora Edits, refer to the Aurora Edit Installation and Configuration Guide for
instructions.
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…