Grass Valley Kaleido-Solo Installation v.5.00 - Manual (Page 102)

GUIDE TO INSTALLATION AND OPERATION
98 | Kaleido-Solo
13 Advanced
In this page you will find a way to change the behavior of the device. All configurable elements under this web page
cannot be accessed through the normal on-screen menu and are not global; each preset can have a different
configuration.
Connect to the Kaleido-
Solo‟s IP address and select
Advanced
13.1 Aspect ratio
You can change the name of any aspect ratio code
(see section 5.3.1 and section 5.5.5).
Once a code is changed it will be highlighted. To
apply the change you must press on the Apply button.
The change will be applied and the page will refresh to
show the change.
There is a limitation of 7 characters and space is not a
valid character.