Grass Valley Kaleido-Solo Installation v.5.00 - Manual (Page 12)

GUIDE TO INSTALLATION AND OPERATION
8 | Kaleido-Solo
3.1 Special button functions
Label Description
Reset button Press to reset unit
Hold for 5 seconds to restore factory default
+
Hold for 5 seconds to enter safe mode (640x480)
or
Analog audio volume control (when not in menu)
3.2 Status LED
The status LED in the lower left corner of the front panel displays the current status of the Kaleido-Solo.
Status Description
Green Video presence on selected input with no errors
Flashing green Kaleido-Solo is still booting up with a valid video input
Red No signal
Signal with errors
Unstable input signal
Hardware failure (after boot up)
Flashing red Kaleido-Solo is still booting up with an invalid video input.