Profile, 8 profile – Grass Valley Kaleido-Solo Installation v.5.00 User Manual
Page 96
GUIDE TO INSTALLATION AND OPERATION
92 | Kaleido-Solo
8 Profile
You can copy the configuration of a Kaleido-Solo to another one (excluding the Ethernet configuration) by going to the
profile section on the Kaleido-
Solo‟s web page.
Connect to the Kaleido-
Solo‟s IP address and select
Profile
Click on Download to download the configuration file
(ksolo_profile.tar).
You can upload an existing profile file
(ksolo_profile.tar) (previously downloaded from a
Kaleido-Solo) to overwrite all parameters except
ethernet configuration.
Press Browse to select the file to upload and then
press on Upload to overwrite Kaleido-
Solo‟s current
parameters.
Note that a profile can be applied (downloaded and uploaded) only if the version is the same.
If you have any problems after uploading a profile press and hold the reset button for 5 seconds (see
section 3). This will load the factory configuration.