Grass Valley Kaleido-Solo Installation v.5.00 User Manual
Page 95
GUIDE TO INSTALLATION AND OPERATION
Kaleido-Solo | 91
A pop-up warning will appear, listing things you should
NOT do while the Kaleido-Solo is upgrading:
When you are ready to proceed, click OK.
The main window will show that the upgrade is in progress, and remind you of the things NOT to do.
When the upgrade is complete, the main window will
notify you that it was successful, and advise you that
the device will reboot automatically.
Note that the web page format has changed. If you want to change the version to a previous one the web
will
not refresh properly. You will see a “404 Not Found”. You will have to clear your browser history.
Close the browser and reopen it.
If you have any problems after an upgrade press and hold the reset button for 5 seconds (see section 3).
This will load the factory configuration.