Grass Valley Kaleido-Solo Installation v.5.00 - Manual (Page 17)

GUIDE TO INSTALLATION AND OPERATION
Kaleido-Solo | 13
The right-most level will usually allow a value or option to be selected. It will be a list of choices, or perhaps a sliding
scale.

When you enter that level, the current value will be shown

Select a different value using the UP and DOWN buttons, then:
Either ...... Push ENTER to acknowledge the value and move back to the previous menu level.
Or ......... Push ESCAPE to move back to the previous menu level while restoring the value to its original state.
When you have finished using the menu, push ESCAPE until you are in the left-most level, and then once more. The
menu will disappear from the screen.
Kaleido-Solo remembers the last path you used, so you can retrace your steps back to the last parameter changed
quickly, just by pushing ENTER until you arrive at the value list.
All parameters are saved automatically 5 seconds after the last change. Be sure to not unplug the Kaleido-Solo within
this 5 seconds or you may lose your modifications.
Note that the 5-second rule also applies when you reverse a change using the ESCAPE key.