Grass Valley Kaleido-Solo Installation v.5.00 - Manual (Page 85)

GUIDE TO INSTALLATION AND OPERATION
Kaleido-Solo | 81
Frame Rate
Choose the frame rate of the output video. This option can be selected only if the resolution is not set to EDID.
50 Hz
60 Hz
Sync Polarity
Positive: Positive horizontal and vertical syncs.
Negative: Negative horizontal and vertical syncs.
Monitor
HDMI: Monitor supports audio.
DVI: Monitor does not support audio.
Apply
Push ENTER to apply the settings made in this menu and close the menu.
At the bottom of the display, the following statuses are shown:
Input: Resolution of the selected input.
Output: Current resolution of the HDMI output.
Monitor: Preferred resolution of the monitor (as reported by the EDID).