Default settings, 9 default settings – Grass Valley Kaleido-Solo Installation v.5.00 User Manual
Page 97
Advertising
GUIDE TO INSTALLATION AND OPERATION
Kaleido-Solo | 93
9 Default settings
You can load the default settings (excluding the Ethernet configuration and safe mode configuration) by going to the
profile section on the Kaleido-
Solo‟s web page. This action is the same as selecting the on-screen menu “Default
settings” see section 5.7.
Connect to the Kaleido-
Solo‟s IP address and select
Profile
Click on Load Default Settings to restore the default
configuration.
Advertising
This manual is related to the following products: