Casio XW-G1 - Manual (Page 11)

Getting Ready to Play
E-9
Prepare a household power outlet or batteries.
• Be sure to comply with the separate “Safety
Precautions”. Incorrect use of this product creates the
risk of electric shock and fire.
• Always make sure that the product is turned off before
plugging in or unplugging the AC adaptor, or before
loading or removing batteries.
Make sure that you use only the AC adaptor (JEITA Standard,
with unified polarity plug) specified for this product. Use of a
different type of AC adaptor can cause malfunction.
1.
Use the AC adaptor specified for this
Synthesizer to connect it to a household power
outlet.
2.
Press
6
POWER to turn on power.
• To turn off power, press
6
POWER again.
To do this: Do this:
(1) Use a pedal Connect an optionally available sustain pedal. For information about the type of
effect applied when the pedal is depressed, see page E-74.
(2) Input sound from another electronic
musical instrument Use a commercially available connecting cord to connect the output terminal
(monaural) of the other instrument to the Synthesizer.
*4
• You can also apply effects to input sounds (page E-36) and use input sounds
when creating new tones as part of the Synthesizer’s tones (page E-21).
(3) Input from an external device Use a commercially available connecting cord to connect the output terminal
(stereo) of a CD player or portable audio player to the Synthesizer.
*4
(4) Input external sound using a
microphone Connect a commercially available dynamic microphone to the Synthesizer.
*4
You can use
cl
MIC VOLUME to adjust sound input with the microphone
independently of other sound.
• For information about applying effects to sound input with a microphone, see
page E-78. For information about using input sounds for tone creation, see
page E-21.
(5) Output Synthesizer sound using audio
equipment or an amplifier Use a commercially available connecting cord to connect the input terminal
(AUX IN, etc.) of the audio equipment or amplifier to the Synthesizer.
*4
• For monaural output with a single connecting cord, connect the cord to the
L/MONO terminal of the Synthesizer.
(6) Use headphones Connect optional or commercially available headphones to the Synthesizer.
*4
• Do not listen to music at very loud volumes for long periods. Doing so creates
the risk of hearing damage.
(7) Supply power to the Synthesizer See “Power Supply” below.
*4 Before connecting, be sure to turn off power to the Synthesizer and the device being connected, and turn 6
VOLUME down
to a low level.
Power Supply
Using a Household Power Outlet
Specified AC Adaptor: AD-E95100L
6
AC adaptor
• Configuration and type
depends on your
geographic location.
DC 9.5V
Household power outlet