Casio XW-G1 - Manual (Page 47)

E-45
Recording and Playing Back Phrases
The Phrase Sequencer is a great way to record musical
phrases that suddenly pop into your mind for later playback.
• The Sequencer has 100 preset phrases.
• You can record a new phrase or overdub onto an existing
phrase to create a user phrase. There is memory for
storage of up to 100 user phrases for later recall when you
need them.
• In addition to what you play on the keyboard, your pedal,
wheel, and knob operations are also recorded as part of
phrase.
• You can choose either of two different playback options:
one-time playback (loop off) or repeat playback (loop on).
• Overdubbing during looped playback is supported. You
also can temporarily cancel overdubbing and perform
looped playback only.
• Pressing a keyboard key will start playback of the phrase
from the corresponding pitch (Key Play).
1.
Hold down
bo
KEY PLAY until the preset
phrase selection screen shown below appears
on the display.
2.
Select the number of the phrase you want to
play.
• To select a phrase number, perform steps 2 through 5
under “To use the Arpeggio Function” (page E-40).
3.
Press
bk
STEP + to toggle looping between on
and off.
4.
Press
bk
STEP – to toggle hold between on and
off.
5.
Press
bo
PLAY/STOP to start phrase playback.
• If the phrase is looped, the
bo
PLAY/STOP light will go
out momentarily to indicate when playback returns to
the beginning of the phrase.
• You can also use the above procedure to play back
user phrases as well.
• Phrase loop and hold settings are saved as parameters
for each phrase.
7 bo
bq
br
bk
To play back a preset
Phrase number
Loop setting Hold setting
Phrase name
OFF : One-time playback
ON : Looped playback
OFF : Phrase plays back only while
bo
PLAY/STOP is
depressed, and stops when the button is released.
ON : Phrase playback starts when
bo
PLAY/STOP is
pressed and stops when
bo
PLAY/STOP is
pressed again.