Casio XW-G1 - Manual (Page 64)

Using the Step Sequencer
E-62
3.
Use the
br
cursor (U, q, w, I) buttons to
move the cursor to an item and then input the
setting you want.
• Button operations to change a setting depend on the
item that is selected.
• For the chain type, you can specify LOOP, which loops
playback, or END to end chain playback.
• You can use
bk
DELETE to delete part of a chain.
• You also can insert part of a chain by pressing
bk
INSERT.
• To check the currently selected pattern, press
bk
CHAIN and the press
bk
START/STOP to play the
pattern. You can edit a pattern as it is playing.
4.
Press
7
WRITE to display the screen for
saving a chain. Save the chain by performing
the same operation as that for saving a user
tone (page E-12).
• For information about deleting data you saved, see
page E-83.
■ Saving a Chain to an External Device
• Memory card (page E-86)
• Computer (page E-92)
1. Hold down
bk
CHAIN until the CHAIN screen
appears.
2.
Use the
bp
dial,
bq
buttons, or the
br
minus
(–) and plus (+) buttons to display the chain you
want to play.
3.
Press
bk
START/STOP.
• To stop playback, press
bk
START/STOP again.
• You can rearrange a chain later, if you want. For details
about how, see “To create a chain” on page E-61.
1.
Hold down
bk
CHAIN until the CHAIN screen
appears.
2.
Press
br
MENU.
3.
Use the
bp
dial or
br
cursor (U, q, w, I)
buttons to move the item selection cursor (0)
to “Initialize” and then press
br
ENTER.
4.
Press
br
ENTER again.
This should cause “Sure?” to appear on the display.
5.
Press
br
YES.
The message “Complete!” will appear on the display when
initialization is complete.
Sequence number: To select a sequence, perform
steps 2 through 5 under “To use
the Arpeggio Function” (page
E-40).
Pattern number :
br
(–, +) or
bl
PATTERN
Measure :
br
(–, +)
Key shift :
br
(–, +) or keyboard key (leftmost
keys, one octave from C to B)
Chain type :
br
(–, +)
Chain number
Chain type
Sequence number
Pattern number
Measure
Key shift
To play back a chain
To initialize chain settings