Casio XW-G1 - Manual (Page 61)

Using the Step Sequencer
E-59
* “C-” on the display indicates C-1 (one octave below C0).
Copy >Ent Data copy
Track Copies data from another track. Copies step data and part
parameter data.
• Data being edited (TMP) can also be copied.
• The following are parts that can be copied.
Pattern Copy data from another pattern.
• Data being edited (TMP) can also be copied.
Note Shift >Ent Note shift editing group
Shift Specifies how much to shift in semitone steps. –24 to +24
Ptn Specifies a pattern to be shifted. 01 to 08
Part Specifies a part to be shifted. Dr1 to 5, Bas, Sl1 and 2, Chd
Clear >Ent Track data clear
Track Pattern, Part Selects a pattern and/or part inside a track. Pattern: 01 to 16
Part: Drm1 to 5, Bass, Sol1 and 2,
Chrd, Ctl1 to 4
Pattern Clears all patterns.
Set Clears all track (set) data.
Slider Edit >Ent Step Sequencer Mode slider settings.
• When the
1
STEP SEQUENCER button is lit, you could
also hold down 2 SLIDER A/B until the “TYPE” screen
appears, and then perform the operations described
below.
TYPE
• While the “TYPE” screen is
displayed, press br MENU
to enter Level 3.
Changes the assigned slider function. For details about the operation
procedure and settings, see the
procedure starting from step 3 under
“Changing Slider Assignments” (page
E-54).
Copy >Ent Copies settings from another slider. For details about the operation
procedure and settings, see the
procedure starting from step 4 under
“Changing Slider Settings” (page
E-60).
Preset >Ent Scale, drum, velocity slider presets.
Note Shift
>Ent Note shift.
M.Slider >Ent Changes the master slider function. For details about the operation
procedure and settings, see the
procedure starting from step 5 under
“Changing the Function Assigned to
the Master Slider” (page E-54).
Level 1 Level 2 Level 3 Description
Setting Range and
Screen Contents
From To
Dr1 to S2 3 Dr1 to S2
Chord 3 Chord
Ctrl1 to 3 3 Ctrl1 to 3
Ctrl4 3 Ctrl4
Copy destination pattern
number
Copy destination part name
Copy source pattern number
Copy source part name
Copy source sequence
(bank, number)
Copy destination pattern number
Copy source pattern number
Copy source sequence
(bank, number)