Casio XW-G1 - Manual (Page 95)

Connecting to a Computer
E-93
You can transfer user tones, phrases, and other data you
saved with the Synthesizer to a computer for storage. Later,
you can return the data back to the Synthesizer when you
need it.
You can also edit tone, performance and other Synthesizer
data on a computer, where it is easier to work with. A special
Data Editor application is required in order to perform
operations such as these.
1.
Go to the CASIO WORLDWIDE site at the
following URL.
http://world.casio.com/
2.
At the site, select a geographic area or country.
3.
After accessing the area site, navigate to the
minimum computer system requirements for
Data Editor for this product.
• You should be able to find a link to Data Editor
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter the
model name of this product and search for it.
• Note that site contents are subject to change without
notice.
4.
Check if your computer system complies with
the minimum requirements for Data Editor.
5.
Download Data Editor and its user’s guide to
your computer.
6.
Follow the procedure in the Data Editor user’s
guide you downloaded in step 5 to install Data
Editor.
7.
Use the procedures in the Data Editor user’s
guide to transfer and edit data.
• See the Data Editor user’s Guide for information about
the types of data that can be transferred and the data
that can be edited.
Saving and Loading Synthesizer
Data to a Computer and Editing
Synthesizer Data on a Computer