Casio XW-G1 - Manual (Page 78)

Using the Performance Mode
E-76
Phrase 2
Phrase 2. Specifies the playback part and performs phrase playback. Can be assigned to
keyboard range C6 to Bb6. When Phrase 2 is configured, the Phrase 2 Stop operation can be
performed with key B6. Part 6 or Part 1 can be selected as the playback part. During playback,
the display segment at the top of Part 16 is lit. The key shift value during playback can be
specified.
• You can display the playback part mixer setting screen by pressing
bn
MIXER.
• Playback part mixer settings are saved as a performance.
• Play Part: 1, 6
• Phrase:
P:0-0 to P:9-9,
U:0-0 to U:9-9
• Key Shift:
–127 to 000 to
+127
Tempo
Tempo. Changes the tempo. When TAP is selected for this setting, the same operations as the
TAP button are performed. For other settings are selected, the tempo is changed in accordance
with the settings shown in the column to the right.
TAP, +, –,
30 to 255
Tone
Tone. When a keyboard range specified for a tone is pressed, the tone of the specified zone
changes in accordance with the Tone content.
• Zone: 1, 2, 3, 4
• Tone: Number
that can be
selected by +, –,
or “Zone Param
>Tone”
Step Seq Step Sequencer. Changes the sequence being played.
+, –,
P:0-0 to P:9-9,
U:0-0 to U:9-9
Chain Chain. Switches and turns on chains.
+, –,
U:0-0 to U:9-9
DSP
DSP. Switches the DSP. When Off, the Chorus/DSP select (page E-38) setting becomes
Chorus. However, DSP cannot be switched while a Solo Synthesizer tone is selected.
Off, +, –, ton,
P:0-0 to P:9-9,
U:0-0 to U:9-9
DSP Line DSP Line. Toggles DSP Line Select for the selected part between on and off. 01 to 16
Note
Note. Generates a note in accordance with the specified part number (Part), keyboard key (Key),
and velocity (Velocity) settings.
• Part: 01 to 16
• Key: C- to G9
*
• Velocity: KeyOn,
001 to 127
Ctrl Chng
Contorol change. Generates a control change in accordance with the specified part number
(Part), control number (Control), and value (Value). When KeyOn is specified for Value, a key on
velocity value is generated. Note, however, that a 000 value is not generated when keyboard
keys are released.
• Part: 01 to 16
• Control:
000 to 119
• Value: KeyOn,
000 to 127
Prog Chng
Program Change with Bank MSB. Generates a program change in accordance with the specified
part number (Part), bank MSB (Bank MSB), and value (Value).
• Part: 01 to 16
• Bank MSB:
000 to 127
• Value:
000 to 127
Ch Press
Channel Pressure. Generates channel pressure in accordance with the specified part number
(Part) and value (Value). Channel after touch. Generates a 000 value when keyboard keys are
released. • Part: 01 to 16
• Value: KeyOn,
001 to 127
Pitch Bend
Pitch bender. Generates pitch bender in accordance with the specified part number (Part) and
value (Value). Generates a 000 value when keyboard keys are released.
• Part: 01 to 16
• Value: KeyOn,
–256 to 000 to
255
Poly Press
Polyphonic Key Pressure. Generates pholyphonic key pressure in accordance with the specified
part number (Part), keyboard key (Key), and value (Value). Generates a 000 value when
keyboard keys are released.
• Setting can be specified using the keyboard keys. • Part: 01 to 16
• Key: C- to G9
*
• Value: KeyOn,
001 to 127
Effect >Ent
Effect parameter. This group includes effect settings (page E-37). For details about group items,
see “Effect Settings” (page E-38).
MIDI >Ent
MIDI parameters. This group includes MIDI parameter (page E-82) settings. Use the 9 PART
minus (–) and plus (+) buttons to select one of the Synthesizer’s 16 sound source parts for
editing.
Ext Out Ch
External Out Channel. Specifies the MIDI send channel for sending information about each part
to an external destination (page E-82).
1 to 16
Ext In Ch External in channel. This is the MIDI message channel received by each part. Off, 1 to 16
Gen Out
Internal send on/off. Specifies whether or not the information of each part is sent to the
Synthesizer’s sound source.
Off, On
Display Description Settings
B