Casio XW-G1 - Manual (Page 32)

Selecting and Creating Tones
E-30
There are two types of parameters: PCM melody tone specific editable parameters and the same parameters that apply to the
other tone categories.
The drum sets in the PCM tones have different editable parameters. See “Editable Parameters for Drum PCM Tone” for more
information about them.
■ Editable Parameters for Non-drum Set PCM Tone
Preparation
Display the screen in step 2 of the procedure under “To edit and save a tone as a user tone” on page E-20.
Editable Parameter List
■ Editable Parameters Common to Other Tone Categories
See “Other Editable Items” on page E-29.
Editable Parameters for PCM Melody Tone (Non-drum PCM Tones)
Display Text Description Settings
Atk.Time Attack time. Specifies the time it takes to reach peak value from note on. –64 to 0 to +63
Rel.Time Release time. Specifies the time it takes for a sustained sound to decay after a key is released. –64 to 0 to +63
Cutoff Cutoff frequency. Specifies the tone cutoff frequency. –64 to 0 to +63
Vib.Type
Vibrato type. Specifies one of the wave types below to be used for vibrato.
Sin (sine wave), Tri (triangular wave), Saw (sawtooth wave), Sqr (square wave)
Sin, Tri, Saw, Sqr
Vib.Depth Vibrato depth. Specifies how vibrato is applied. –64 to 0 to +63
Vib.Rate Vibrato rate. Specifies the vibrato rate (frequency). –64 to 0 to +63
Vib.Delay Vibrato delay. Specifies the delay in the timing for applying vibrato. –64 to 0 to +63
Oct.Shift Octave shift. Changes the tone of notes in octave units. –2 to 0 to +2
TouchSense
Touch sense. Specifies the degree of change in volume in accordance with change in keyboard
playing touch.
–64 to 0 to +63