Editing movies – Canon PowerShot SX540 HS User Manual
Page 104
104
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Editing Movies
Still Images
Movies
You can cut movies to remove unneeded portions at the beginning or end.
1
Choose [ ].
●
Following steps 1 – 5 in “Viewing”
(= 84), choose [ ] and press the [ ]
button.
●
The movie editing panel and editing bar
are now displayed.
2
Specify portions to cut.
●
(1) is the movie editing panel, and (2) is
the editing bar.
●
Press the [ ][ ] buttons to choose [ ]
or [ ].
●
To view the portions you can cut
(identified by [ ] on the screen), press
the [ ][ ] buttons to move [ ]. Cut the
beginning of the movie (from [ ]) by
choosing [ ], and cut the end of the
movie by choosing [ ].
●
If you move [ ] to a position other than a
[ ] mark, in [ ] the portion before the
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
(1)
(2)
●
Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
4
Save as a new image and review.
●
Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
●
The image is now saved as a new file.
●
Follow step 5 in “Resizing Images”
●
Some images may not be corrected accurately.
●
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
●
Protected images cannot be overwritten.